Installing this fencing is easy.                                                                             SAFE, EASY, DURABLE

Anchor Vises are the key to easy installation. Once the monofilament is inserted through the one-way anchor vise, it is locked. You can pull to tension, but the monofilament is prevented from sliding the other way and loosening.

1. Use the Anchor Vise at the corner or starting post: drill a 5/8" hole; thread the monofilament through the hole and into the anchor vise.

2. Continue stringing the monofilament either through wood posts or attach to your T-posts (with insulators) to your end post.

3. Again drill a 5/8" hole; thread the monofilament through the post into another anchor vise and HAND PULL the monofilament till you get the desired tension (about 3% of the static length). You can pull from both ends if you are spanning a long distance.

4. If you need to repair or extend your fencing at a later date, use a Splicer. Insert one end of the monofilament into one end of the splicer and the other end into the other end of the splicer. Go to the end post and HAND PULL to tighten.

Recommendations:

»  We recommend 52" to 54" exposed post height.

»  We like to set our posts between 8' and 12' apart. This depends on your horses, you know them best.

»  We recommend a minimum of 4 to 5 strands, again depending on your horses.

»  We recommend 8 to 10 inches between each strand, with your bottom strand 14" above the ground.

»  We recommend an electric line, especially with foals.

»  We recommend installing with insulators so that electric wire can be added simply by wrapping it around a strand of monofilament and through the insulators. You choose which strand, depending on your horses.

For additional installation options and instructions, please contact us. There are many different ways to install Bayco© Finish-Line Fencing as well as many other things for which it can be used. Please let us know any questions you may have.